Cisco 7604 Configuration Manual page 579

Chapter 25 Monitoring the Firewall Services Module
To configure the FWSM to send an entire syslog message class to a configured output destination, enter
the following command:
hostname(config)# logging class message_class {buffered | history | mail | monitor | trap}
[severity_level]
Where the message_class argument specifies a class of syslog messages to be sent to the specified output
destination. See
The buffered, history, mail, monitor, and trap keywords specify the output destination to which syslog
messages in this class should be sent. The history keyword enables SNMP logging. The monitor
keyword enables Telnet and SSH logging. The trap keyword enables syslog server logging. Select one
destination per command-line entry. If you want to specify that a class should go to more than one
destination, enter a new command for each output destination.
The severity_level argument further restricts the syslog messages to be sent to the output destination by
specifying a severity level. For more information about message severity levels, see the
Levels" section on page
The following example specifies that all syslog messages related to the class ha (high availability, also
known as failover) with a severity level of 1 (alerts) should be sent to the internal logging buffer.
hostname(config)# logging class ha buffered alerts
Table 25-1
class.
Table 25-1 Syslog Message Classes and Associated Message ID Numbers
Class
auth
bridge
ca
config
e-mail
ha
ip
np
ospf
rip
rm
session
snmp
sys
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
OL-20748-01
Table 25-1 for a list of syslog message classes.
25-20.
lists the syslog message classes and the ranges of syslog message IDs associated with each
Definition
User Authentication
Transparent Firewall
PKI Certification Authority
Command interface
E-mail Proxy
Failover (High Availability)
IP Stack
Network Processor
OSPF Routing
RIP Routing
Resource Manager
User Session
SNMP
System
Configuring and Managing Syslog Messages
Syslog Message ID Numbers
109, 113
110, 220
717
111, 112, 208, 308
719
101, 102, 103, 104, 210, 311, 709
209, 215, 313, 317, 408
319
318, 409, 503, 613
107, 312
321
106, 108, 201, 202, 204, 302, 303, 304, 305, 314, 405, 406,
407, 500, 502, 607, 608, 609, 616, 620, 703, 710
212
199, 211, 214, 216, 306, 307, 315, 414, 604, 605, 606, 610,
612, 614, 615, 701, 711
"Severity
25-13