AAA for System Administrators
Figure 23-1
For commands that are a single word, you must permit unmatched arguments, even if there are no
•
arguments for the command, for example enable or help (see
Figure 23-2
To disallow some arguments, enter the arguments preceded by deny.
•
For example, to allow enable, but not enable password, enter enable in the commands field, and
deny password in the arguments field. Be sure to check the Permit Unmatched Args check box so
that enable alone is still allowed (see
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
23-20
Permitting All Related Commands
Permitting Single Word Commands
Figure
Chapter 23
Configuring Management Access
Figure
23-2).
23-3).
OL-20748-01