Cisco 7604 Configuration Manual page 648

Failover Example Configurations
the configuration on the FWSM using the write terminal, show startup, or show running commands,
the mode displays after the FWSM Release (blank means single mode, "<system>" means you are in
multiple mode in the system configuration, and <context> means you are in multiple mode in a context).
hostname primary
enable password farscape
password crichton
interface vlan 4
interface vlan 5
interface vlan 6
!The vlan 10 and 11 interfaces are created when you enter the failover lan interface and
failover link commands.
interface vlan 10
interface vlan 11
interface vlan 200
interface vlan 201
interface vlan 202
failover lan interface faillink vlan 10
failover link statelink vlan 11
failover lan unit primary
failover interface ip faillink 192.168.253.1 255.255.255.252 standby 192.168.253.2
failover interface ip statelink 192.168.253.5 255.255.255.252 standby 192.168.253.6
failover interface-policy 1
failover replication http
failover
admin-context contexta
context contexta
context contextb
context contextc
Context A Configuration (Primary Unit—Example 7)
To change to a context configuration, enter the changeto context name command. To change back to the
system, enter changeto system.
firewall transparent
passwd secret1969
enable password h1andl0
interface vlan 200
interface vlan 4
interface bvi 56
monitor-interface inside
monitor-interface outside
route outside 0 0 10.0.3.4 1
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
B-24
description LAN Failover interface
description STATE Failover interface
allocate-interface vlan200
allocate-interface vlan4
config-url disk://contexta.cfg
allocate-interface vlan201
allocate-interface vlan5
config-url ftp://admin:passw0rd@10.0.3.16/contextb.cfg
allocate-interface vlan202
allocate-interface vlan6
config-url ftp://admin:passw0rd@10.0.3.16/contextc.cfg
nameif outside
security-level 0
bridge-group 56
nameif inside
security-level 100
bridge-group 56
ip address 10.0.3.1 255.255.255.0 standby 10.0.3.2
Appendix B Sample Configurations
OL-20748-01