Cisco 7604 Configuration Manual page 33

Quick Start Steps
Task
Step 8
Configuring Transparent Firewall Interfaces for Through
Traffic, page 6-6
Step 9
Assigning an IP Address to a Bridge Group, page 6-6
Step 10
Configuring a Default Route, page 8-4
Step 11 Adding an Extended ACE, page 13-7
Step 12 Applying an Access List to an Interface, page 15-4
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
OL-20748-01
Description
For each VLAN interface, you must set a name (such
as inside or outside), a security level, and a bridge
group.
Assign an IP address to each bridge group.
Create a default route to an upstream router for
returning management traffic.
Before any traffic can go through the FWSM, you
must create an access list that permits traffic.
Apply the access list to an interface.
xxxiii