Cisco 7604 Configuration Manual page 595

Chapter 25 Monitoring the Firewall Services Module
Table 25-3 SNMP MIB and Trap Support (continued)
MIB and Trap
IP-FORWARD-MIB
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
OL-20748-01
Description
The FWSM supports browsing of the following table: inetCidrRouteTable.
The following example shows how entries displayed from the show route
command can be retrieved through SNMP operations.
!
interface Vlan50
nameif inside
security-level 100
ip address 50.0.0.2 255.0.0.0
!
interface Vlan60
nameif outside
security-level 0
ip address 60.0.0.2 255.0.0.0
!
snmp-server host outside 60.0.0.1 community public version 2c
udp-port 161
!
hostname# show route
50.0.0.0 255.0.0.0 is directly connected, inside
60.0.0.0 255.0.0.0 is directly connected, outside
An SNMP request from the inetCidrRouteTable returns:
snmpwalk 60.0.0.2 -c public -v 2c 1.3.6.1.2.1.4.24.7 returns
IP-MIB::ip.24.7.1.7.1.4.50.0.0.0.8.0.1.4.0.0.0.0 = INTEGER: 1
<---- ifindex
IP-MIB::ip.24.7.1.7.1.4.60.0.0.0.8.0.1.4.0.0.0.0 = INTEGER: 2
<---- Inindex
IP-MIB::ip.24.7.1.8.1.4.50.0.0.0.8.0.1.4.0.0.0.0 = INTEGER: 3
<---- refer local
IP-MIB::ip.24.7.1.8.1.4.60.0.0.0.8.0.1.4.0.0.0.0 = INTEGER: 3
<---- refer local
IP-MIB::ip.24.7.1.9.1.4.50.0.0.0.8.0.1.4.0.0.0.0 = INTEGER: 2
<---- 2 means local or connected route
IP-MIB::ip.24.7.1.9.1.4.60.0.0.0.8.0.1.4.0.0.0.0 = INTEGER: 2
<---- 2 means local or connected route
IP-MIB::ip.24.7.1.10.1.4.50.0.0.0.8.0.1.4.0.0.0.0 = Gauge32: 0
IP-MIB::ip.24.7.1.10.1.4.60.0.0.0.8.0.1.4.0.0.0.0 = Gauge32: 0
IP-MIB::ip.24.7.1.11.1.4.50.0.0.0.8.0.1.4.0.0.0.0 = Gauge32: 0
IP-MIB::ip.24.7.1.11.1.4.60.0.0.0.8.0.1.4.0.0.0.0 = Gauge32: 0
IP-MIB::ip.24.7.1.12.1.4.50.0.0.0.8.0.1.4.0.0.0.0 = INTEGER: 0
<--- primary metric 0 for connected route
IP-MIB::ip.24.7.1.12.1.4.60.0.0.0.8.0.1.4.0.0.0.0 = INTEGER: 0
<--- primary metric 0 for connected route
IP-MIB::ip.24.7.1.13.1.4.50.0.0.0.8.0.1.4.0.0.0.0 = INTEGER: -1
IP-MIB::ip.24.7.1.13.1.4.60.0.0.0.8.0.1.4.0.0.0.0 = INTEGER: -1
IP-MIB::ip.24.7.1.14.1.4.50.0.0.0.8.0.1.4.0.0.0.0 = INTEGER: -1
IP-MIB::ip.24.7.1.14.1.4.60.0.0.0.8.0.1.4.0.0.0.0 = INTEGER: -1
IP-MIB::ip.24.7.1.15.1.4.50.0.0.0.8.0.1.4.0.0.0.0 = INTEGER: -1
IP-MIB::ip.24.7.1.15.1.4.60.0.0.0.8.0.1.4.0.0.0.0 = INTEGER: -1
IP-MIB::ip.24.7.1.16.1.4.50.0.0.0.8.0.1.4.0.0.0.0 = INTEGER: -1
IP-MIB::ip.24.7.1.16.1.4.60.0.0.0.8.0.1.4.0.0.0.0 = INTEGER: -1
IP-MIB::ip.24.7.1.17.1.4.50.0.0.0.8.0.1.4.0.0.0.0 = INTEGER: 1
<----- 1 means route is active
IP-MIB::ip.24.7.1.17.1.4.60.0.0.0.8.0.1.4.0.0.0.0 = INTEGER: 1
<----- 1 means route is active
Configuring SNMP
25-29