Cisco 7604 Configuration Manual page 300

Catalyst 6500 series switch and cisco 7600 series router firewall services module configuration guide using the cli
Hide thumbs Also See for 7604:
Table of Contents

Advertisement

Inbound and Outbound Access List Overview
You might want to use an outbound access list to simplify your access list configuration. For example,
if you want to allow three inside networks on three different interfaces to access each other, you can
create a simple inbound access list that allows all traffic on each inside interface (see
Figure 15-1
ACL Inbound
Permit from
10.1.1.0/24
See the following commands for this example:
hostname(config)# access-list INSIDE extended permit ip any any
hostname(config)# access-group INSIDE in interface inside
hostname(config)# access-list HR extended permit ip any any
hostname(config)# access-group HR in interface hr
hostname(config)# access-list ENG extended permit ip any any
hostname(config)# access-group ENG in interface eng
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
15-2
Inbound Access Lists
Web Server:
209.165.200.225
FWSM
Inside
ACL Inbound
any
to
any
Permit from
10.1.2.0/24
Chapter 15
Outside
Eng
ACL Inbound
any
to
any
Permit from
10.1.3.0/24
Permitting or Denying Network Access
Figure
any
to
any
OL-20748-01
15-1).

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

7609-s76137606-sCatalyst 6500 series7600 series

Table of Contents