Downloading And Backing Up Configuration Files - Cisco 7604 Configuration Manual

Downloading and Backing Up Configuration Files

To upgrade the maintenance partition software, enter one of the following commands for the appropriate
Step 3
download server.
For multiple context mode, you must be in the system execution space.
•
•
Passwords for the root and guest accounts of the maintenance partition are retained after the upgrade.
Reload the FWSM to load the new maintenance software by entering the following command:
Step 4
hostname# reload
Alternatively, you can log out of the FWSM in preparation for booting in to the maintenance partition;
from the maintenance partition, you can install application software to both application partitions. To
end the FWSM session, enter the following command:
hostname# exit
Logoff
[Connection to 127.0.0.31 closed by foreign host]
Router#
You might need to enter the exit command multiple times if you are in a configuration mode.
See the
the FWSM into the maintenance partition.
The following example shows the prompts for the TFTP server information:
hostname# upgrade-mp tftp
Address or name of remote host [127.0.0.1]? 10.1.1.5
Source file name [cdisk]? mp.3-2-1-3.bin.gz
copying tftp://10.1.1.5/mp.3-2-1-3.bin.gz to flash
[yes|no|again]? yes
!!!!!!!!!!!!!!!!!!!!!!!
Received 1695744 bytes.
Maintenance partition upgraded.
Downloading and Backing Up Configuration Files
This section describes how to download and back up configuration files, and includes the following
sections:
•
•
•
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
24-14
To download the maintenance software from a TFTP server, enter the following command:
hostname# upgrade-mp tftp[://server[:port][/path]/filename]
You are prompted to confirm the server information, or if you do not supply it in the command, you
can enter it at the prompts.
To download the maintenance software from an HTTP or HTTPS server, enter the following
command:
hostname# upgrade-mp http[s]://[user[:password]@]server[:port][/path]/filename
"Installing Application Software from the Maintenance Partition" section on page 24-5
Viewing Files in Flash Memory, page 24-15
Downloading a Text Configuration to the Startup or Running Configuration, page 24-15
Downloading a Context Configuration to Disk, page 24-16
Chapter 24 Managing Software, Licenses, and Configurations
to reload
OL-20748-01