Viewing Files In Flash Memory; Downloading A Text Configuration To The Startup Or Running Configuration - Cisco 7604 Configuration Manual

Chapter 24 Managing Software, Licenses, and Configurations
•

Viewing Files in Flash Memory

You can view files in flash memory and see information about the files.
•
•

Downloading a Text Configuration to the Startup or Running Configuration

You can download a text file from the following server types to the single mode configuration or the
multiple mode system configuration:
•
•
•
•
For a multiple mode context, see the
page
When you copy a configuration to the running configuration, you merge the two configurations. A merge
Note
adds any new commands from the new configuration to the running configuration. If the configurations
are the same, no changes occur. If commands conflict or if commands affect the running of the context,
then the effect of the merge depends on the command. You might get errors, or you might have
unexpected results.
To copy the startup configuration or running configuration from the server to the FWSM, enter one of
the following commands for the appropriate download server:
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
OL-20748-01
Backing Up the Configuration, page 24-17
To view the files in Flash memory, enter the following command:
hostname# dir disk:
For example:
hostname# dir
Directory of disk:/
9 -rw- 1411
10 -rw- 959
11 -rw- 1929
To view extended information about a specific file, enter the following command:
hostname# show file information [path:/]filename
The default path is the root directory of the internal flash memory (disk:/).
For example:
hostname# show file info admin.cfg
disk:/admin.cfg:
type is ascii text
file size is 959 bytes
TFTP
FTP
HTTP
HTTPS
24-16.
08:53:42 Oct 06 2005 old_running.cfg
09:21:50 Oct 06 2005 admin.cfg
08:23:44 May 07 2005 admin_backup.cfg
"Downloading a Context Configuration to Disk" section on
Downloading and Backing Up Configuration Files
24-15