Upgrading The Maintenance Software - Cisco 7604 Configuration Manual

Chapter 24 Managing Software, Licenses, and Configurations
By default, the password is cisco.
The FWSM shows the version when you first log in:
Maintenance image version: 2.1(2)
To view the maintenance version after you log in, enter the following command:
Step 5
root@localhost# show version
Maintenance image version: 3.2(1)
mp.3-2-1.bin : Thu Nov 18 11:41:36 PST 2007 : integ@kplus-build-lx.cisco.com
Line Card Number :WS-SVC-FWM-1
Number of Pentium-class Processors :
BIOS Vendor: Phoenix Technologies Ltd.
BIOS Version: 4.0-Rel 6.0.9
Total available memory: 1004 MB
Size of compact flash: 123 MB
Daughter Card Info: Number of DC Processors: 3
Size of DC Processor Memory (per proc): 32 MB

Upgrading the Maintenance Software

If you need to upgrade the maintenance software, perform the following steps:
Download the maintenance software from Cisco.com at the following URL:
Step 1
http://www.cisco.com/cgi-bin/tablebuild.pl/cat6000-serv-maint
Put the software on a TFTP, HTTP, or HTTPS server that is accessible from the FWSM admin context.
If required, log out of the maintenance partition and reload the application partition by performing the
Step 2
following steps:
a.
b.
c.
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
OL-20748-01
Log out of the maintenance partition by entering the following command:
root@localhost# logout
If required, reboot the FWSM into the application partition by entering the command for your
operating system:
For Cisco IOS software, enter the following command:
–
Router# hw-module module mod_num reset
For Catalyst operating system software, enter the following command:
–
Console> (enable) reset mod_num
To session in to the FWSM, enter the command for your operating system:
– Cisco IOS software
Router# session slot number processor 1
Catalyst operating system software
–
Console> (enable) session module_number
Installing Maintenance Software
2
24-13