Entering A New Activation Key; Installing Application Or Asdm Software - Cisco 7604 Configuration Manual

Installing Application or ASDM Software

Enter the pipe character (|) as part of the command.
Connect a web browser to one of the following websites (the URLs are case-sensitive):
Step 2
Use the following website if you are a registered user of Cisco.com:
http://www.cisco.com/go/license
Use the following website if you are not a registered user of Cisco.com:
http://www.cisco.com/go/license/public
When prompted, enter the following information:
Step 3
•
•
•
The activation key will be automatically generated and sent to the e-mail address that you provide.

Entering a New Activation Key

To enter the activation key, enter the following command:
hostname(config)# activation-key key
The key is a four-element hexadecimal string with one space between each element. For example, a key
in the correct form might look like the following key:
0xe02888da 0x4ba7bed6 0xf1c123ae 0xffd8624e
The leading 0x specifier is optional; all values are assumed to be hexadecimal.
If you are already in multiple context mode, enter this command in the system execution space.
The activation key is not stored in your configuration file. The key is tied to the serial number of the
Note
device.
This example shows how to change the activation key on the FWSM:
hostname(config)# activation-key 0xe02888da 0x4ba7bed6 0xf1c123ae 0xffd8624e
Installing Application or ASDM Software
This section contains the following topics:
•
•
•
•
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
24-2
Your Product Authorization Key
The serial number of your FWSM.
Your e-mail address.
Installation Overview, page 24-3
Installing Application Software from the FWSM CLI, page 24-3
Installing Application Software from the Maintenance Partition, page 24-5
Installing ASDM from the FWSM CLI, page 24-8
Chapter 24 Managing Software, Licenses, and Configurations
OL-20748-01