Enabling And Disabling Tape Compression; Enabling And Disabling Key-On-Tape - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual

Chapter 7 Using the Command Line Interface to Configure SME
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Command
Step 3
switch(config-sme-cl)# auto-volgrp
switch(config-sme-cl)#
Step 4
switch(config-sme-cl)# no
auto-volgrp
switch(config-sme-cl)#

Enabling and Disabling Tape Compression

To enable tape compression, follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# sme cluster
clustername1
switch(config-sme-cl)#
Step 3
switch(config-sme-cl)#
tape-compression
switch(config-sme-cl)#
Step 4
switch(config-sme-cl)# no
tape-compression
switch(config-sme-cl)#

Enabling and Disabling Key-on-Tape

Cisco SME provides the option to store the encrypted security keys on the backup tapes.
To enable the key-on-tape feature, follow these steps:
Command
Step 1
switch# config t
Step 2
switch(config)# sme cluster
clustername1
switch(config-sme-cl)#
Step 3
switch(config-sme-cl)# key-ontape
switch(config-sme-cl)#
Step 4
switch(config-sme-cl)# no key-ontape
switch(config-sme-cl)#
OL-18091-01, Cisco MDS NX-OS Release 4.x
Purpose
Specifies automatic volume grouping.
Specifies no automatic volume grouping.
Purpose
Enters configuration mode.
Specifies the cluster and enters SME cluster configuration
submode.
Enables tape compression.
Disables tape compression.
Purpose
Enters configuration mode.
Specifies the cluster and enters SME cluster configuration
submode.
Enables the key-on-tape feature.
Disables tape compression.
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
Enabling and Disabling Tape Compression
7-7