Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual page 211

Appendix A Cisco SME CLI Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
odrt.bin
To perform offline data recovery of tape encrypted by Cisco SME, use the odrt.bin command on
Linux-based systems. This command allows you to recover data when the MSM-18/4 module or the
Cisco MDS 9222i fabric switch is not available.
Syntax Description --help
--version
-h
-l
-r
-w
if
of
kf
verbose
Defaults None.
Command Modes None. This command runs from the Linux shell.
Command History Release
3.3(1c)
Usage Guidelines The odrt.bin command operates in the following steps:
•
•
For information on exporting volume groups, see
Note
OL-18091-01, Cisco MDS NX-OS Release 4.x
odrt.bin [--help][--version]{-h | -l | -r | -w}{if=input_device_or_file | of=output_device_or_file |
kf=key_export_file | verbose=level}
Modification
This command was introduced.
Tape-to-disk– In this mode, the odrt.bin command reads the encrypted data from the tape and stores
it as intermediate files on the disk. This mode is invoked with the -r flag. The input parameter is the
tape device name and filename on the disk is the output parameter.
Disk-to-tape– In this mode, the odrt.bin command reads intermediate files on the disk, decrypts and
decompresses (if applicable) the data and writes the clear-text data to the tape. The decryption key
is obtained from the volume group file that is exported from the Cisco Key Management Center
(KMC). This mode is invoked with the -w flag. The input parameter is the filename on the disk and
tape device name is the output parameter. The volume group file name (key export file) is also
accepted as a parameter. Key export password needs to be entered at the command prompt.
(Optional) Displays information on the tool.
(Optional) Displays the version of the tool.
Reads and prints the tape header information on the tape.
Lists all SCSI devices.
Reads the tape device and writes data to intermediate file(s).
Reads the intermediate file(s) on disk and writes data to the tape.
Specifies the input device or file.
Specifies the output device or file
Specifies the key export file name.
Specifies the level.
Chapter 6, "Cisco SME Key Management."
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
odrt.bin
A-23