Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual page 200

fc-redirect version2 enable
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
fc-redirect version2 enable
To enable the version2 mode in FC-Redirect, use the fc-redirect version2 enable command in
configuration mode. To disable the version2 mode in FC-Redirect, use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History Release
3.3(1c)
Usage Guidelines This command is used to increase scalability of FC-Redirect.
Disabling version2 mode after it is enabled in the fabric is not recommended. However, if you want to
disable version2 mode, you cannot disable it until all FC-Redirect configurations are deleted.
FC-Redirect configurations can be deleted only by deleting all corresponding application configurations.
The MDS switches running Cisco SAN-OS 3.2.x cannot be added to the fabric after the version2 mode
is enabled. If the switches are added, all further FC-Redirect configuration changes will fail across the
fabric. This could lead to traffic disruption for applications such as SME and DMM.
Use the show fc-redirect configs command to see the list of applications that create FC-Redirect
configurations.
If version2 mode is enabled in the fabric and you want to move a switch to a different fabric, use the
clear fc-redirect decommission-switch command before moving the switch to a different fabric. If not,
all switches in the new fabric will be converted to version2 mode automatically.
All switches in the fabric should be running SAN-OS Release 3.3.x or NX-OS 4.x. Ensure that there are
Note
no fabric changes or upgrades in progress. Use the show fc-redirect peer-switches command (UP state)
to see all the switches in the fabric.
Examples
The following example shows how to enable version2 mode in FC-Redirect:
switch# fc-redirect version2 enable
Please make sure to read and understand the following implications
before proceeding further:
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
A-12
fc-redirect version2 enable
no fc-redirect version2 enable
Modification
This command was introduced.
Appendix A Cisco SME CLI Commands
OL-18091-01, Cisco MDS NX-OS Release 4.x