Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual page 253

Appendix C Provisioning Self-Sign Certificates
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
Click Edit SSL Settings.
Step 3
In the KMC SSL settings area, select the SME KMC Trust certificate from the drop-down menu. This is
Step 4
the switch root certificate.
You must copy the acerts to the /mds9000/conf/cert directory. Certificates in the conf/cert directory are
Note
listed in the drop-down menus.
From the drop-down menu, select the SME KMC Server certificate.
Step 5
The keystore files that are stored in the KMC directory are listed in the drop-down menu.
Enter the server certificate password. Confirm the password.
Step 6
Click Submit SSL Settings to apply the changes, or click Cancel. Save the settings.
Step 7
To change the SSL settings again, click Edit SSL Settings.
After editing the SSL settings, restart the Fabric Manager Server.
Note
If On is selected in the Transport Settings during cluster creation, then SSL is enabled on KMC with the
following results:
OL-18091-01, Cisco MDS NX-OS Release 4.x
Editing SSL Settings in Cisco Fabric Manager Web Client
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
C-7