Interoperability Matrix; Msm-18/4 Modules; Key Management Center And Fabric Manager Server - Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual

Interoperability Matrix

S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
•
•
•
•
Interoperability Matrix
Verify the interoperability matrix to be used. If needed, submit an RPQ for new types and versions of
SAN components such as tape libraries and drives, or new backup application software versions.
Refer to the

MSM-18/4 Modules

Collect the following information about MSM-18/4 modules:
•
•
•
•

Key Management Center and Fabric Manager Server

Determine which of the following key management strategies and policies are appropriate for you:
•
•
•
•
•
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
F-2
Number of hosts and tape drives.
SAN topology diagram.
Types of modules used for ISL connectivity (Generation 1 or Generation 2).
This information is required for large Cisco SME setups.
Note
Zoning of the hosts and tape drives and if all the drives are accessible to all the hosts. It is preferred
that there is selective accessibility between the hosts and drives.
Cisco MDS 9000 Family Interoperability Support Matrix.
Determine the total throughput requirement and the required number of MSM-18/4 modules. The
throughput requirement can be based on either meeting the backup window or based on achieving
the line rate throughput for each drive. Refer to the
for details.
Determine the placement of the MSM-18/4 modules. Consult the design guide for sample topology
and recommendations.
For large Cisco SME setups, determine if the line cards used for ISLs can scale for the FC Redirect
configuration. Refer to the
Generation 2 modules are recommended for ISL connectivity.
Note
Order the appropriate number of Cisco SME licenses.
Use Cisco KMC or KMC with RSA Key Manager for the data center.
Use PostgreSQL database or Oracle Express as the database.
We recommend that you use PostgreSQL as the database.
Use shared key mode or unique key per tape.
Configure key-on-tape mode.
Use tape recycling.
Cisco Storage Media Encryption Design Guide
Cisco Storage Media Encryption Design Guide
Appendix F Planning For Cisco SME Installation
for details.
OL-18091-01, Cisco MDS NX-OS Release 4.x