Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual page 206

key-ontape
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
key-ontape
To configure keys on the tape mode and store the encrypted security keys on the backup tapes, use the
key-ontape command. To disable this feature, use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults Disabled.
Command Modes Cisco SME cluster configuration submode.
Command History Release
3.2(2c)
Usage Guidelines This command allows the encrypted security keys to be stored on the backup tapes.
This feature is supported only for unique keys.
Note
Before using this command, automatic volume grouping should be disabled by using the auto-volgrp
command.
Examples The following example enables the key-ontape feature:
switch# config terminal
switch(config)# sme cluster clustername1
switch(config-sme-cl)# key-ontape
The following example disables the key-ontape feature:
switch# config terminal
switch(config)# sme cluster clustername1
switch(config-sme0-cl)# no key-ontape
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
A-18
key-ontape
no key-ontape
Modification
This command was introduced.
Appendix A Cisco SME CLI Commands
OL-18091-01, Cisco MDS NX-OS Release 4.x