Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual page 217

Appendix A Cisco SME CLI Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
shared-keymode
To configure the shared key mode, use the shared-keymode command. To specify the unique key mode,
use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes Cisco SME cluster configuration submode.
Command History Release
3.2(2c)
Usage Guidelines The shared-keymode command generates a single key that is used for a group of backup tapes.
The no shared-keymode command generates unique or specific keys for each tape cartridge.
The shared unique key mode should be specified if you want to enable the key-ontape feature.
Note
Examples The following example specifies the shared key mode:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# shared-keymode
The following example specifies the shared unique keymode:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# no shared-keymode
Related Commands Command
show sme cluster
OL-18091-01, Cisco MDS NX-OS Release 4.x
shared-keymode
no shared-keymode
Modification
This command was introduced.
Description
Displays Cisco SME cluster information.
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
shared-keymode
A-29