Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual page 213

Appendix A Cisco SME CLI Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
rule
To specify the tape volume group regular expression, use the rule command. To disable this feature, use
the no form of the command.
Syntax Description
range range
regexp regular expression
Defaults None.
Command Modes Cisco SME crypto tape volume group configuration submode.
Command History Release
3.2(2c)
Usage Guidelines None.
Examples The following example specifies the volume group regular expression:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# tape-bkgrp tbg1
switch(config-sme-cl-tape-bkgrp)# tape-volgrp tv1
switch(config-sme-cl-tape-bkgrp-volgrp)#rule regexp r1
Related Commands Command
show sme cluster
tape-bkgrp groupname
tape-volgrp volume groupname
OL-18091-01, Cisco MDS NX-OS Release 4.x
rule {range range | regexp regular expression}
no rule {range range | regexp regular expression}
Modification
This command was introduced.
Specifies the crypto tape volume barcode range. The maximum length
is 32 characters.
Specifies the volume group regular expression. The maximum length
is 32 characters.
Description
Displays information about Cisco SME cluster.
Configures crypto backup group.
Configures crypto backup volume group.
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
rule
A-25