Routed Mode; Enabling Or Disabling The Catena Solution - Cisco Nexus 7000 Series Configuration Manual

Configuring the Catena Solution

Routed Mode

Figure 2: Routed Mode
enabled with bad traffic, and disabled.
Figure 2: Routed Mode
Configuring the Catena Solution
You can configure Cisco Nexus devices such that packets can be redirected through multiple devices using
Catena.

Enabling or Disabling the Catena Solution

By default, Catena is disabled on the Cisco NX-OS device. You must explicitly enable Catena to configure
and verify the authentication commands.
Ensure that you have installed the enhanced Layer 2 package license.
Note
shows the traffic flow between appliances in the routed mode when Catena is enabled,
Cisco Nexus 7000 Series Switches Configuration Guide: The Catena Solution
Routed Mode
7