tape-keyrecycle
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
tape-keyrecycle
To configure a tape key recycle policy, use the tape-keyrecycle command. To disable this feature, use
the no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults
None.
Command Modes
Cisco SME cluster configuration submode.
Command History
Release
3.2(2c)
Usage Guidelines
Cisco SME allows you to recycle the tape keys. If you enable tape key recycling, all the previous
instances of the tape key will be deleted.
Examples
The following example enables tape key recycling:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# tape-keyrecycle
The following example disables tape key recycling:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# no tape-keyrecycle
Related Commands
Command
clear sme
show sme cluster
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
A-52
tape-keyrecycle
no tape-keyrecycle
Modification
This command was introduced.
Description
Clears Cisco SME configuration.
Displays information about the Cisco SME cluster.
Appendix A
Cisco SME CLI Commands
OL-18091-01, Cisco MDS NX-OS Release 4.x