setup
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
setup
To run the basic setup facility, use the setup command.
Syntax Description
ficon
sme
Defaults
None.
Command Modes
EXEC.
Command History
Release
3.3(1c)
Usage Guidelines
Use the setup sme command to create the sme-admin and sme-recovery roles for Cisco SME.
Examples
The following example creates the sme-admin and sme-recovery roles:
switch(config)# setup sme
Set up four roles necessary for SME, sme-admin, sme-stg-admin, sme-kmc-admin and
sme-recovery? (yes/no) [no] yes
If CFS is enabled, please commit the roles so that they can be available.
SME setup done.
Related Commands
Command
show role
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
A-28
setup ficon | sme
Runs the basic FICON setup command facility.
Runs the basic Cisco SME setup command facility.
Modification
This command was introduced.
Description
Displays information about the various Cisco SME role configurations.
Appendix A
Cisco SME CLI Commands
OL-18091-01, Cisco MDS NX-OS Release 4.x