Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual page 234

shutdown (Cisco SME cluster configuration submode)
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
shutdown (Cisco SME cluster configuration submode)
To disable a cluster for recovery, use the shutdown command. To enable the cluster for recovery, use the
no form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes Cisco SME cluster configuration submode.
Command History Release
3.2(2c)
Usage Guidelines To disable operation of a cluster for the purpose of recovery, use the shutdown command. To enable the
cluster for normal usage, use the no shutdown command.
The default state for clusters is no shutdown. Use the shutdown command for cluster recovery. See the
Chapter 9, "Cisco SME Troubleshooting"
Examples The following example restarts the cluster after recovery is complete:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# no shutdown
The following example disables the cluster operation in order to start recovery:
switch# config t
switch(config))# sme cluster c1
switch(config-sme-cl)# shutdown
Related Commands Command
show sme cluster
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
A-46
shutdown
no shutdown
Modification
This command was introduced.
for additional details about recovery scenarios.
Description
Displays information about the Cisco SME cluster.
Appendix A Cisco SME CLI Commands
OL-18091-01, Cisco MDS NX-OS Release 4.x