Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual page 238

tape-compression
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
tape-compression
To configure tape compression, use the tape-compression command. To disable this feature, use the no
form of the command.
Syntax Description
This command has no arguments or keywords.
Defaults None.
Command Modes Cisco SME cluster configuration submode.
Command History Release
3.2(2c)
Usage Guidelines Use this command to compress encrypted data.
Examples The following example enables tape compression:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# tape-compression
The following example disables tape compression:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# no tape-compression
Related Commands Command
clear sme
show sme cluster
show sme cluster tape
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
A-50
tape-compression
no tape-compression
Modification
This command was introduced.
Description
Clears Cisco SME configuration.
Displays information about the Cisco SME cluster.
Displays information about all tape volume groups or a specific group.
Appendix A Cisco SME CLI Commands
OL-18091-01, Cisco MDS NX-OS Release 4.x