Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual page 192

cluster
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
cluster
To configure a cluster feature, use the cluster command.
Syntax Description
enable
Defaults None.
Command Modes Configuration mode.
Command History Release
3.2(2)
NX-OS 4.1(1b)
Usage Guidelines Starting from Cisco NX-OS 4.x release, the cluster command is replaced by the feature command.
Examples The following example enables the Cisco SME clustering:
switch# config terminal
switch(config)# cluster enable
switch(config)#
Related Commands Command
show sme cluster
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
A-4
cluster enable
Enables or disables a cluster.
Modification
This command was introduced.
This command was deprecated.
Description
Displays information about the Cisco SME cluster.
Appendix A Cisco SME CLI Commands
OL-18091-01, Cisco MDS NX-OS Release 4.x