Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual page 237

Appendix A Cisco SME CLI Commands
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
tape-bkgrp
To configure a crypto tape backup group, use the tape-bkgrp command. To disable this feature, use the
no form of the command.
Syntax Description
groupname
Defaults None.
Command Modes Cisco SME cluster configuration mode submode.
Command History Release
3.2(2c)
Usage Guidelines A tape volume group is a group of tapes that are categorized by function. For example, HR1 could be
designated tape volume group for all Human Resources backup tapes.
Adding tape groups allows you to select VSANs, hosts, storage devices, and paths that Cisco SME will
use for encrypted data. For example, adding a tape group for HR data sets the mapping for Cisco SME
to transfer data from the HR hosts to the dedicated HR backup tapes.
Examples
The following example adds a backup tape group:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# tape-bkgrp group1
switch(config-sme-cl-tape-bkgrp)#
The following example removes a backup tape group:
switch# config t
switch(config)# sme cluster c1
switch(config-sme-cl)# no tape-bkgrp group1
switch(config-sme-cl-tape-bkgrp)#
Related Commands Command
clear sme
show sme cluster
OL-18091-01, Cisco MDS NX-OS Release 4.x
tape-bkgrp groupname
no tape-bkgrp groupname
Specifies the backup tape group. The maximum length is 31 characters.
Modification
This command was introduced.
Description
Clears Cisco SME configuration.
Displays information about the Cisco SME cluster.
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
tape-bkgrp
A-49