Cisco AJ732A - MDS 9134 Fabric Switch Configuration Manual page 222

show fc-redirect peer-switches
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show fc-redirect peer-switches
To display all the peer switches in the fabric running FC-Redirect, use the show fc-redirect
peer-switches command.
Syntax Description This command has no other keywords or arguments.
Defaults
None.
Command Modes
EXEC mode.
Command History Release
3.2(2c)
Usage Guidelines
This command is used for verifying the fabric state and for troubleshooting.
To find the switch IP address for the list of switch WWNs, use the show cfs peers command.
Note
Examples
The following example displays the peer switches in the fabric running FC-Redirect:
switch# show fc-redirect peer-switches
------------------------------------------------
num
------------------------------------------------
1
2
3
4
This table shows FC-Redirect peer switches summaries.
Field
Up
Down
Syncing
Error
Cisco MDS 9000 Family Storage Media Encryption Configuration Guide
A-34
show fc-redirect peer-switches
Modification
This command was introduced.
Switch WWN
20:00:00:05:30:00:90:9e
21:00:00:05:30:00:90:9f
22:00:00:05:30:00:90:91
23:00:00:05:30:00:90:92
Description
The peer switch is fully synced with the local switch.
The communication with peer switch is broken.
The local switch is syncing its configuration with the peer switch.
Connection with peer switch is not available.
State
UP
DOWN
SYNCING
ERROR
OL-18091-01, Cisco MDS NX-OS Release 4.x
Appendix A Cisco SME CLI Commands