Interface Naming Convention - NETGEAR GS108T-200NAS Software Administration Manual

3. To enable encryption, select the DES option in the Encryption Protocol field. Then, enter an
encryption code of eight or more alphanumeric characters in the Encryption Key field.
4. Click Apply.
To access configuration information for SNMPv1 or SNMPv2, click System  SNMP 
SNMPv1/v2 and click the page that contains the information to configure.

Interface Naming Convention

The GS108T and GS110TP support physical and logical interfaces. Interfaces are identified by
their type and the interface number. The physical ports are gigabit interfaces and are numbered on
the front panel. You configure the logical interfaces by using the software.
naming convention for all interfaces available on the switch.
Table 1-2. Types of Interface
Interface
Physical
Link Aggregation Group (LAG)
CPU Management Interface
Getting Started
GS108T and GS110TP Smart Switch Software Administration Manual
Description
The physical ports are gigabit Ethernet
interfaces and are numbered sequentially
starting from one.
LAG interfaces are logical interfaces that are
only used for bridging functions.
This is the internal switch interface responsible
for the switch base MAC address. This interface
is not configurable and is always listed in the
MAC Address Table.
v1.0, April 2010
Table 1-2 describes the
Example
g1, g2, g3
l1, l2, l3
LAG1, LAG2
c1
1-21