Table of Contents
Advertisement
ACL Wizard
The ACL Wizard simplifies the ACL rule configuration process. The Wizard contains a short list
of access criteria that you can either permit or deny. When you select the permit or deny link
associated with the access criteria, you are redirected to a page that is automatically configured
with several of the settings.
Note: Before you use the ACL Wizard to configure rules, you must create either a MAC
ACL, Standard IP ACL, or Extended IP ACL that will contain the rules. To create a
MAC ACL, see
ACL, see
To display the ACL Wizard page, click Security ACL.
Figure 5-25
To use the ACL Wizard:
1. Determine the type of ACL to configure and create a MAC ACL, standard IP ACL, or
extended IP ACL.
•
To permit or deny traffic based on the Source MAC Address, create a MAC ACL.
•
To permit or deny traffic based on the Destination MAC Address, create a MAC ACL.
•
To permit or deny traffic based on the Source IP Address, create a Standard ACL.
•
To permit or deny traffic based on the Destination IP Address, create an Extended ACL.
Managing Device Security
GS108T and GS110TP Smart Switch Software Administration Manual
"MAC ACL" on page
"IP ACL" on page
5-50.
v1.0, April 2010
5-44. To create a standard or extended IP
5-43
Hide quick links:
Advertisement
Table of Contents
