Table of Contents
Advertisement
•
LAG Type. Select Static or LACP. When the LAG is static, it does not transmit or process
received LAGPDUs, for example the member ports do not transmit LAGPDUs and all the
LAGPDUs it may receive are dropped. The default is Static.
•
Active Ports. A listing of the ports that are actively participating members of this Port
Channel. A maximum of 4 ports can be assigned to a port channel.
•
LAG State. Indicates whether the link is Up or Down.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
4. If you make any changes to this page, click Apply to send the updated configuration to the
switch. Configuration changes take effect immediately.
LAG Membership
Use the LAG Membership page to select two or more full-duplex Ethernet links to be aggregated
together to form a link aggregation group (LAG), which is also known as a port-channel. The
switch can treat the port-channel as if it were a single link.
To access the LAG Membership page, click Switching LAG Basic LAG Membership.
Figure 3-4
To create a LAG:
1. From the LAG ID field, select the LAG to configure.
Configuring Switching Information
GS108T and GS110TP Smart Switch Software Administration Manual
v1.0, April 2010
3-7
Hide quick links:
Advertisement
Table of Contents
