Figure 1-6
Smart Control Center Utilities
In addition to device discovery and network address assignment, the Smart Control Center
includes several maintenance features. This section describes the following Smart Control Center
utilities:
•
"Network Utilities" on page 1-9
•
"Configuration Upload and Download" on page 1-10
•
"Firmware Upgrade" on page 1-12
Network Utilities
From the Network tab, you can perform the following functions:
•
DHCP Refresh—Forces the switch to release the current bindings and request new address
information from the DHCP server.
•
Reboot Device—Reboots the selected device.
•
Web Browser Access—Launches a Web browser and connects to the management interface
for the selected device.
•
Configure Device—Allows you to change network information for the switch such as the IP
address, and DHCP client mode.
Getting Started
GS108T and GS110TP Smart Switch Software Administration Manual
v1.0, April 2010
1-9