Download File To Switch; Tftp File Download - NETGEAR GS108T-200NAS Software Administration Manual

5. In the Transfer File Path field, specify the path on the TFTP server where you want to put the
file. You may enter up to 32 characters. Include the backslash at the end of the path. A path
name with a space is not accepted. Leave this field blank to save the file to the root TFTP
directory.
6. In the Transfer File Name field, specify a destination file name for the file to upload. You
may enter up to 32 characters. The transfer fails if you do not specify a file name. For a code
transfer, use an .stk file extension.
7. Select the Start File Transfer check box to initiate the file upload.
8. Click Apply to begin the file transfer.
The last row of the table displays information about the progress of the file transfer. The page
refreshes automatically until the file transfer completes or fails.

Download File To Switch

The switch supports system file downloads from a remote system to the switch by using either
TFTP or HTTP.
The Download menu contains links to the following options:
• "TFTP File Download" on page 7-5
• "HTTP File Download" on page 7-8

TFTP File Download

Use the Download File to Switch page to download device software, the image file, the
configuration files and SSL files from a TFTP server to the switch.
You can also download files via HTTP. See
information.
Maintenance
GS108T and GS110TP Smart Switch Software Administration Manual
"HTTP File Download" on page 7-8
v1.0, April 2010
for additional
7-5