Table of Contents
Advertisement
GS108T and GS110TP Smart Switch Software Administration Manual
•
Stop on Full: When the buffer is full, the system stops logging new messages and
preserves all existing log messages.
3. If you change the buffered log settings, click Apply to apply the changes to the system and the
changes will be saved.
The Memory Log table also appears on the Memory Log page.
Table 6-5. Memory Log Table Fields
Field
Total Number of Messages
The rest of the page displays the Memory Log messages. The format of the log message is the
same for messages that are displayed for the message log, persistent log, or console log. Messages
logged to a collector or relay via syslog have the same format as well.
The following example shows the standard format for a log message:
<14> Mar 24 05:34:05 10.131.12.183-1 UNKN[2176789276]:
main_login.c(179) 3855 %% HTTP Session 19 initiated for user admin
connected from 10.27.64.122
The number contained in the angle brackets represents the message priority, which is derived from
the following values:
Priority = (facility value × 8) + severity level.
The facility value is usually one, which means it is a user-level message. Therefore, to determine
the severity level of the message, subtract eight from the number in the angle brackets. The
example log message has a severity level of 6 (informational). For more information about the
severity of a log message, see the Severity Filter description on
The message was generated on March 24 at 5:34:05 a.m by the switch with an IP address of
10.131.12.183. The component that generated the message is unknown, but it came from line 179
of the main_login.c file. This is the 3,855
message indicates that the administrator logged onto the HTTP management interface from a host
with an IP address of 10.27.64.122.
Use the buttons at the bottom of the page to perform the following actions:
•
Click Clear to clear the messages out of the buffered log in the memory.
•
Click Refresh to update the page with the latest messages in the log.
•
Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
6-16
Description
Displays the number of messages the system has logged in memory.
Only the 64 most recent entries are displayed on the page.
message logged since the switch was last booted. The
th
v1.0, April 2010
page
6-20.
Monitoring the System
Hide quick links:
Advertisement
Table of Contents
