Ip Configuration - NETGEAR GS108T-200NAS Software Administration Manual

The following table describes the status information the System Page displays.
Table 2-1. System Description Fields
Field
Serial Number
System Object ID
Date & Time
System Up Time
Base MAC Address
Model Name
Boot Version
Software Version

IP Configuration

Use the IP Configuration page to configure network information for the management interface,
which is the logical interface used for in-band connectivity with the switch through any of the
switch's front panel ports. The configuration parameters associated with the switch's network
interface do not affect the configuration of the front panel ports through which traffic is switched
or routed.
To access the page, click System  Management  IP Configuration. A screen similar to the
following displays.
Configuring System Information
GS108T and GS110TP Smart Switch Software Administration Manual
Description
The serial number of the switch.
The base object ID for the switch's enterprise MIB.
The current date and time.
Displays the number of days, hours, and minutes since the last system
restart.
The universally assigned network address.
The model name of the switch.
The boot code version of the switch.
The software version of the switch.
v1.0, April 2010
2-3