3. From the Notification field, specify whether the port should send a topology change
notification if a device is connected or removed.
4. From the Transmit Optional TLVs field, specify whether the port should transmit optional type
length values (TLVs) in the LLDP PDU frames. If enabled, the following LLDP-MED TLVs
are transmitted:
•
MED Capabilities
•
Network Policy
•
Location Identification
•
Extended Power via MDI: PSE
•
Extended Power via MDI: PD
•
Inventory
5. Click Apply to send the updated configuration to the switch. These changes occur
immediately and the configuration will be saved.
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
Local Information
Use the LLDP Local Information page to view the data that each port advertises through LLDP.
To display the LLDP Local Device Information page, click SystemAdvanced LLDPLocal
Information.
Configuring System Information
GS108T and GS110TP Smart Switch Software Administration Manual
v1.0, April 2010
2-37