Gs108T And Gs110Tp Switch Features And Defaults - NETGEAR GS108T-200NAS Software Administration Manual

GS108T and GS110TP Smart Switch Software Administration Manual
Table A-3. GS108T and GS110TP Switch Performance
Feature
Switching capacity
Forwarding method
Packet forwarding rate
MAC addresses
Green Ethernet

GS108T and GS110TP Switch Features and Defaults

Table A-4. Port Characteristics
Feature
Auto negotiation/static speed/
duplex
Auto MDI/MDIX
802.3x flow control/back pressure
Port mirroring
Port trunking (aggregation)
802.1D spanning tree
802.1w RSTP
802.1s spanning tree
Static 802.1Q tagging
Learning process
PoE (GS110TP only)
A-2
Value
Non-Blocking Full WireSpeed on all packet sizes
Store and Forward
10M:14,880 pps/
100M:148,810 pps/
1G:1,488,000 pps
4K
Power consumption savings by cable length (<10m)
Automatic power down on port when link is down (GS110TP only)
Sets Supported
All ports
N/A
1 (per system)
1
4
1
1
3 instances
64
Supports Static and dynamic MAC
entries
8
Hardware Specifications and Default Values
v1.0, April 2010
Default
Auto negotiation
Enabled
Disabled
Disabled
Pre-configured
Disabled
Disabled
Disabled
VID = 1
Member ports = 8 (GS108T)
Member ports = 10 (GS110TP)
Dynamic learning is enabled by
default
Enabled