Configuring Switching Information; Ports; Port Configuration - NETGEAR GS108T-200NAS Software Administration Manual

Use the features in the Switching tab to define Layer 2 features. The Switching tab contains links
to the following features:
• "Ports" on page 3-1
• "Link Aggregation Groups" on page 3-5
• "VLANs" on page 3-10
• "Voice VLAN" on page 3-16
• "Auto-VoIP" on page 3-20
• "Spanning Tree Protocol" on page 3-22
• "Multicast" on page 3-38
• "Forwarding Database" on page 3-53

Ports

The pages on the Ports tab allow you to view and monitor the physical port information for the
ports available on the switch. From the Ports link, you can access the following pages:
• "Port Configuration" on page 3-1
• "Flow Control" on page 3-4

Port Configuration

Use the Port Configuration page to configure the physical interfaces on the switch.
To access the Port Configuration page, click Switching  Ports  Port Configuration.

Configuring Switching Information

v1.0, April 2010
Chapter 3
3-1