Dual Image Configuration - NETGEAR GS108T-200NAS Software Administration Manual

GS108T and GS110TP Smart Switch Software Administration Manual

Dual Image Configuration

The system running a legacy software version will ignore (not load) a configuration file created by
the newer software version. When a configuration file created by the newer software version is
discovered by the system running an older version of the software, the system will display an
appropriate warning to the user.
Use the Dual Image Configuration page to set the boot image, configure an image description, or
delete an image.
To display the Dual Image Configuration page, click Maintenance  File Management  Dual
Image  Dual Image Configuration.
Figure 7-6
To configure Dual Image settings:
1. Select the image to configure.
The Current-active field displays the name of the active image.
2. To configure a descriptive name for the selected software image, type the name in the Image
Description field.
3. To set the selected image as the active image, select the Active Image check box.
7-10
v1.0, April 2010
Maintenance