Voice Vlan; Voice Vlan Properties - NETGEAR GS108T-200NAS Software Administration Manual

GS108T and GS110TP Smart Switch Software Administration Manual
7. Specify how you want the port to handle tagged frames:
• Enable: A tagged frame will be discarded if this port is not a member of the VLAN
identified by the VLAN ID in the tag. In an untagged frame, the VLAN is the Port VLAN
ID specified for the port that received this frame.
• Disable: All frames are forwarded in accordance with the IEEE 802.1Q VLAN standard.
The factory default is Disable.
8. Specify the default 802.1p priority assigned to untagged packets arriving at the port. Possible
values are 0–7.
9. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
10. If you make any changes to this page, click Apply to send the updated configuration to the
switch. Configuration changes take place immediately.

Voice VLAN

Configure the Voice VLAN settings for ports that carry traffic from IP phones. The Voice VLAN
feature can help ensure that the sound quality of an IP phone is safeguarded from deteriorating
when the data traffic on the port is high.
From the VLAN link, you can access the following pages:
• "Voice VLAN Properties" on page 3-16
• "Voice VLAN Port Setting" on page 3-18
• "Voice VLAN OUI" on page 3-19

Voice VLAN Properties

To display the Voice VLAN Properties page, click Switching Voice VLAN  Basic 
Properties.
3-16
v1.0, April 2010
Configuring Switching Information