Table of Contents
Advertisement
To configure Port Mirroring:
1. Select the check box next to a port to configure it as a source port.
2. In the Destination Port field, specify the port to which port traffic is be copied. Use the g1,
g2,...format to specify the port. You can configure only one destination port on the system.
3. From the Session Mode menu, select the mode for port mirroring on the selected port:
•
Enable. Multiple Port Mirroring is active on the selected port.
•
Disable. Port mirroring is not active on the selected port, but the mirroring information is
retained.
4. Click Apply to apply the settings to the system. If the port is configured as a source port, the
Mirroring Port field value is Mirrored.
5. To delete a mirrored port, select the check box next to the mirrored port, and then click Delete.
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
Monitoring the System
GS108T and GS110TP Smart Switch Software Administration Manual
v1.0, April 2010
6-25
Hide quick links:
Advertisement
Table of Contents
