Table of Contents
Advertisement
Understanding the User Interfaces
GS108T and GS110TP software includes a set of comprehensive management functions for
configuring and monitoring the system by using one of the following methods:
•
Web user interface
•
Simple Network Management Protocol (SNMP)
Each of the standards-based management methods allows you to configure and monitor the
components of the GS108T and GS110TP software. The method you use to manage the system
depends on your network size and requirements, and on your preference.
The GS108T and GS110TP Smart Switch Software Administration Manual describes how to use
the Web-based interface to manage and monitor the system.
Using the Web Interface
To access the switch by using a Web browser, the browser must meet the following software
requirements:
•
HTML version 4.0, or later
•
HTTP version 1.1, or later
•
Java Runtime Environment 1.6 or later
Use the following procedures to log on to the Web interface:
1. Open a Web browser and enter the IP address of the switch in the Web browser address field.
2. The factory default password is password. Type the password into the field on the login
screen, as shown in
sensitive.
3. After the system authenticates you, the System Information page displays.
Getting Started
GS108T and GS110TP Smart Switch Software Administration Manual
Figure 1-6 on page
1-9, and then click Login. Passwords are case
v1.0, April 2010
1-15
Hide quick links:
Advertisement
Table of Contents
