The Dynamic MAC Address Table shows the MAC addresses and their associated VLANs learned
on the selected port. Use the Port List menu to select the interface for which you want to display
data.
Table 5-7. Dynamic MAC Address Table Fields
Field
VLAN ID
MAC Address
Click Refresh to refresh the page with the most current data from the switch.
Protected Ports Membership
If a port is configured as protected, it does not forward traffic to any other protected port on the
switch, but it will forward traffic to unprotected ports. Use the Protected Ports Membership page to
configure the ports as protected or unprotected.
To display the Protected Ports Membership page, click the Security Traffic Control
Protected Ports link.
Figure 5-24
To configure protected ports:
1. Click the orange bar to display the available ports.
Managing Device Security
GS108T and GS110TP Smart Switch Software Administration Manual
Description
Displays the VLAN ID corresponding to the Last Violation MAC address.
Displays the MAC addresses learned on a specific port.
v1.0, April 2010
5-41