G L O S S A R Y - Cisco 10008 Hardware Installation Manual

Hardware installation guide
Table of Contents

Advertisement

Symbols
See APS.
1+1 APS
10-Mbps baseband Ethernet specification using two pairs of twisted-pair cabling (Category 3, 4, or 5):
10BaseT
one pair for transmitting data and the other for receiving data. 10BaseT, which is part of the IEEE 802.3
specification, has a distance limit of approximately 328 feet (100 meters) per segment. See also
802.3
100-Mbps baseband Fast Ethernet specification using UTP wiring. Like the 10BaseT technology on
100BaseT
which it is based, 100BaseT sends link pulses over the network segment when no traffic is present.
However, these link pulses contain more information than those used in 10BaseT. The 100BaseT
specification is based on the IEEE 802.3 standard. See also 10BaseT,
IEEE
1000-Mbps gigabit Ethernet specification using two strands of multimode or single mode fiber-optic
1000BaseLX/LH
cable per link. To guarantee proper signal recovery, a 1000BaseLX/LH link cannot exceed 1804 feet
(550 meters) in length over multimode fiber or 32,810 feet (10 km) in length over single mode fiber.
Based on the IEEE 802.3 standard with reach over single mode fiber extended from 5 km to 10 km. See
also 1000BaseSX, 1000BaseZX,
IEEE
1000-Mbps gigabit Ethernet specification using two strands of multimode fiber-optic cable per link. To
1000BaseSX
guarantee proper signal recovery, a 1000BaseSX link cannot exceed 1804 feet (550 meters) in length.
The 1000Base SX specification is based on the IEEE 802.3 standard. See also 1000BaseLX/LH,
1000BaseZX,
1000-Mbps gigabit Ethernet specification that refers to the 1000BaseCX, 1000BaseSX, and
1000BaseX
1000BaseLX standards for gigabit Ethernet over fiber-optic cabling. The 1000BaseX specification is
based on the IEEE 802.3 standard. See also 1000BaseSX, 1000BaseLX/LH, 1000BaseZX,
Ethernet, and
IEEE
1000-Mbps gigabit Ethernet specification using two strands of single mode fiber-optic cable per link.
1000BaseZX
To guarantee proper signal recovery, a 1000BaseZX link cannot be longer than 62.1 mi (100 km). This
is a Cisco specification. See also 1000BaseSX, 1000BaseLX/LH,
A set of IEEE standards for the definition of LAN protocols.
802.x
OL-0659-13
and Ethernet.
802.3.
802.3.
Gigabit
Ethernet, and
802.3.

G L O S S A R Y

Gigabit
Ethernet, and
IEEE
802.3.
Cisco 10008 Router Hardware Installation Guide
Fast
Ethernet, and
Gigabit
Gigabit
Ethernet, and
IEEE
IEEE
802.3.
GL-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Esr10008 - 10000 modular expansion base

Table of Contents