Cisco 10008 Hardware Installation Manual page 110

Removing and Replacing Field-Replaceable Units
Figure 5-19
Secure the power cabling to the chassis by feeding a tie wrap through the slot on the side of the chassis
Step 7
and binding the cables
Replace the rear safety cover, making sure that the power cables exit through the holes on the side of the
Step 8
cover
Cisco 10008 Router Hardware Installation Guide
5-18
Securing DC Power Cables to the Chassis
(Figure 5-19).
(Figure 5-19).
Chapter 5 Maintaining the Cisco 10008 Router
OL-0659-13