Cisco 10008 Hardware Installation Manual page 71

Chapter 3 Installing the Cisco 10008 Router
Figure 3-29
Repeat steps 3 and 4 for any remaining alarm indicators.
Step 5
Secure the power cabling to the chassis by feeding a tie wrap through the slot on the side of the chassis
Step 6
and binding the wires (see blowout in
Replace the rear safety cover, making sure that the alarm indicator wires exit through the hole on the
Step 7
side of the cover
OL-0659-13
Alarm Terminal Block Connections
Figure
(Figure 3-30).
ALARMS
50VA
SELV max
NC
COM MINOR
NO
NC
COM MAJOR
NO
NC
COM CRITICAL
NO
3-30).
Cisco 10008 Router Hardware Installation Guide
Connecting Alarm Indicators
3-29