Cisco 10008 Hardware Installation Manual page 126

Connecting Alarm Indicators
Figure 5-35
Remove the safety cover by lifting it up and out from the chassis
Step 3
Figure 5-36
Strip not more than 0.4 inches (10 mm) of insulation off of the ends of the alarm indicator wire
Step 4
(Figure
Cisco 10008 Router Hardware Installation Guide
5-34
Removing the Rear Cover
Stripping Insulation
10 mm max
5-36).
Chapter 5 Maintaining the Cisco 10008 Router
(Figure 5-35).
OL-0659-13