Connecting Alarm Indicators - Cisco 10008 Hardware Installation Manual

Connecting Alarm Indicators

Figure 5-33
Set the power switch to the on (|) position
Step 9
The green LED on the PEM lights indicating that the PEM is on.
Step 10 Replace the front cover if necessary (see the
Connecting Alarm Indicators
The Cisco 10008 router provides relay contacts for optional (customer-supplied) audible or visual alarm
indicators. Relay contacts are provided for three levels of severity:
•
•
•
Use the following procedure to connect an alarm indicator to the system:
Cisco 10008 Router Hardware Installation Guide
5-32
Setting AC Power Switch to the On Position
PO WE R
FA UL T
P O W E R
F A U L T
PO WE R
FA UL T
Minor—This is an informational alarm and does not affect the system operation.
Major—A condition that affects system operation and should be investigated as soon as possible.
Critical—A condition that affects system operation and requires immediate attention.
FAN S
OK FAN
FAIL URE MUL TI-
FAN
FAIL URE
CAU TIO
Whe n hot N
rem ova swa ppin
l and repl g this fan
be don ace men tray,
e in und
syst em er two t mus t
shu tdow min utes
n will occ or
ur.
1
2
3
4
0A
PR OC
CIS CO ES SO R 0B
CIS CO ON LY
100 00
100 00 5
CIS CO
6
100 00 CIS CO
7
100 00 CIS CO
8
100 00
CIS CO
100 00
CIS CO
CIS CO
100 00
100 00 CIS CO
CIS CO
100 00
100 00
PR OC
ES SO R
ON LY
(Figure 5-33).
"Replacing the Front Cover" section on page
Chapter 5 Maintaining the Cisco 10008 Router
5-6).
OL-0659-13