Replacing An Air Filter In A Chassis With Release Tabs - Cisco 10008 Hardware Installation Manual

Chapter 5 Maintaining the Cisco 10008 Router

Replacing an Air Filter in a Chassis with Release Tabs

Use the following procedure to remove and replace the air filter in a chassis that uses release tabs to hold
the filter in place:
Figure 5-8
PO W ER
FA UL T
M IS W IR
1
Step 1 Press the release tabs out toward each side of the chassis to release the air filter and slide it out of the
chassis
Figure 5-9
Slide the new filter all of the way into the chassis and lift it up until it snaps into place
Step 2
OL-0659-13
Air Filter Release Tabs
E
P R O C
E S S O R
1
Air filter release tabs
(Figure 5-8).
Inserting the Air Filter
PO W ER
FA UL T
M IS W IR
E
O N LY
P R O C
E S S O R
O N LY
Cisco 10008 Router Hardware Installation Guide
Removing and Replacing Field-Replaceable Units
(Figure 5-9).
5-9