Cisco 10008 Hardware Installation Manual page 129

Chapter 5 Maintaining the Cisco 10008 Router
Figure 5-39
PO W ER
FA UL T
M IS W IR
1 ESD socket
Remove the front cover if necessary (see
Step 1
Attach an antistatic wrist strap to your wrist and to the ESD socket on the chassis, or to a bare metal
Step 2
surface on the chassis or frame
If you are removing and replacing a PRE, continue with the next step.
•
If you are installing a redundant PRE, go to Step 8.
•
Step 3 Disconnect any interface cables from the PRE if necessary.
Step 4 Remove the PCMCIA card from the PRE (see the
Card" section on page
OL-0659-13
ESD Chassis Connection
CI SC O
10 00 0
E
P R O C
1
(Figure
5-44).
E S S O R
O N LY
Front Cover Procedures, page
5-39).
"Removing and Installing a PCMCIA Flash Memory
Cisco 10008 Router Hardware Installation Guide
Connecting Alarm Indicators
5-4).
5-37