Appendix A
Technical Specifications
Table A-1
Description
Performance routing engine
(PRE)
PRE PCMCIA Flash disk card
options
PRE DRAM memory options
1. cfm = cubic feet per minute
2. Btu = British thermal units
For Specifications for Operating and Nonoperating Environments, see
section on page
For technical specifications for the Cisco 10008 line cards, see the
Installation
For regulatory compliance and safety information, see the
Information for the Cisco 10000 Series Routers
OL-0659-13
Cisco 10008 Router System Specifications (continued)
Specifications
Part Number: ESR-PRE1 (Primary)
•
Part Number: ESR-PRE1/R (Redundant)
Power: 80W
•
Max per chassis: 2
•
•
Weight: 7.5 lb (3.41 kg)
Height: 16.0 in. (40.64 cm)
Depth: 9.97 in. (25.32 cm)
Width: 1.91 in. (4.84 cm)
Three Interface ports:
RJ-45 IEEE 802.3 Ethernet 100BASE-T
•
RJ-45 auxiliary (AUX) port for modem access
•
RJ-45 console (CON) port for terminal access
•
Two PCMCIA Flash card slots:
Slot 0
•
Slot 1
•
40 MB—Part Number: ESR-PRE-MEM-FD40
•
128 MB—Part Number: ESR-PRE-MEM-FD128
•
•
256 MB—Part Number: ESR-PRE-MEM-256M
•
512 MB—Part Number: ESR-PRE-MEM-512M
2-2.
Guide.
"Site Environmental Requirements"
Cisco 10000 Line Card Hardware
Regulatory Compliance and Safety
document.
Cisco 10008 Router Hardware Installation Guide
A-3