Where To Go Next - Cisco AS5350XM Configuration Manual

Where to Go Next

Verifying the ROM Monitor Image
To verify whether the upgrade ROM monitor or the read-only ROM monitor image has been installed,
perform the following steps.
enable
Step 1
Enables privileged EXEC mode. Enter your password if prompted.
Router> enable
show rom-monitor
Step 2
When in Cisco IOS, this command in privileged EXEC mode shows both the read-only and the upgrade
ROM monitor image versions, as well as which ROM monitor image is running.
Router# show rom-monitor
ReadOnly ROMMON version is:
System Bootstrap, Version 12.3(12r)PI6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2004 by cisco Systems, Inc.
Upgrade ROMMON version is:
System Bootstrap, Version 12.3(12r)PI6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2004 by cisco Systems, Inc.
Currently running ROMMON from ReadOnly region
ROMMON from ReadOnly region is selected for next boot
Where to Go Next
At this point you should go to these references:
•
Tip The following publications are available on the Documentation DVD, or on the World Wide Web from
the Cisco home page.
•
•
CCDE, CCENT, Cisco Eos, Cisco HealthPresence, the Cisco logo, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence,
Cisco WebEx, DCE, and Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are
service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA, CCNP, CCSP,
CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems Capital, the Cisco Systems logo,
Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast Step, Follow Me Browsing, FormShare, GigaDrive,
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Software Configuration Guide
14
Chapter 2, "Verifying Basic Setup,"
configuration before configuring the Cisco AS5350XM or Cisco AS5400XM universal gateway
using the CLI to prepare your system for data call processing.
Cisco IOS publications Dial Solutions Configuration Guide and Dial Solutions Command Reference
provide additional basic configuration information. For more advanced configuration topics, see the
Cisco IOS software configuration guide, feature modules, and command reference publications that
pertain to your Cisco IOS software release.
For troubleshooting information, see the System Error Messages and Debug Command Reference
publications.
Understanding Basic Hardware Architecture and Cisco IOS Software
to analyze your system and execute basic tasks and system